iCAHE Outcome Calculators
- What are Outcome Measures
- About Outcomes Calculators
- Outcome Calculator User Manuals
- Outcome Measures (User Videos)
- Ordering Information
- Feature Outcome Measure
An outcome measure is a diagnostic tool to measure performance, ability, or function of an individual. They are valuable tools for healthcare professionals to engage in the recovery, rehabilitation and return to work of injured individuals. The outcome measures contained within the CAHE Outcomes Calculator Version 5 have been selected on their psychometric properties (validity, reliability, sensitivity to detect change over time and clinical utility for patient populations with peripheral joint disorders). The outcome measures represent a range of aspects of functioning and/ or disability, which are measured at the level of body functions / structure, the individual and society, as defined by the International Classification of Functioning. The international Centre for Allied Health Evidence website houses five outcome calculators as follows:
• Basic Outcomes Calculator
• Musculoskeletal Outcomes Calculator
• Neurological Disorders Outcomes Calculator
• Incontinence Outcomes Calculator
• Chronic Disease Management Outcomes Calculator
Details of all the Outcomes Instruments used in each of the iCAHE Outcomes Calculators can be viewed in the following document: iCAHE OC Benchmarking
The iCAHE Outcomes Calculator has been under development since 1999 by researchers in the International Centre for Allied Health Evidence, and the School of Computing Science (University of South Australia), in a series of staged research strategies. Preliminary investigations comprised:
- Wide-spread data collection from over 2000 clinicians regarding current use of measures of health outcome in clinical practice
- Investigation of requirements of funding bodies regarding health outcomes derived from treatment by clinicians
- Literature review to assess evidence of validity, reliability, sensitivity to change and clinical utility of common measures of health outcome used by clinicians, as well as other measures of health outcome that may be useful for clinicians
- Discussions with health Australian clinicians regarding the barriers and facilitators to regular use of health outcomes in clinical practice and
- Evaluation of the content of common measures of outcome and their usage by researchers and clinicians.
About outcome measures
The term outcome incorporates the health gain and costs associated with treatment. For the management of many conditions, this involves an episode of care (a number of linked occasions of service). Currently the most common type of outcome information is on cost, or number of contacts with the patient.
Our investigations highlighted that most clinicians collect no standard information from patients on health outcome, despite this being the most important information required by health funders. What information is collected is non-standardised, collected at variable time frames throughout the episode, and is usually handwritten in patient notes, which makes it inefficient and less than useful for clinical benchmarking. The need for a simple, efficient mechanism for collecting standard information routinely on patient progress was identified from our preliminary investigations. The Outcomes Calculator software was developed to address this need.
Advantages of using the iCAHE Outcomes Calculators
The iCAHE Outcomes Calculators aim to facilitate the use of standardised outcome measures in clinical practice to monitor changes in patient status over time. Patients complete selected outcome measures prior to, or following treatment (without reference to the clinician) and the data can be entered into the iCAHE Outcomes Calculators by administrative staff. This avoids the potential bias by the clinician and ensures that the patient's view of their condition is recognised. The iCAHE Outcomes Calculators automatically compute the score for each outcome measure and use norms for comparison, as appropriate. Summarising outcomes in this way assists in the communication of patient progress between clinicians, patients and funders.
For example, the outcome measures contained within the iCAHE Musculoskeletal Outcomes Calculator have been selected based on their validity, reliability, sensitivity to detect change over time and clinical utility for patient populations frequently treated by physiotherapists. They represent a range of aspects of functioning/disability, which are measured at the level of body functions/structure, the individual and society, as defined by the International Classification of Functioning.
Details on the outcome instruments in each of the five iCAHE Outcomes Calculators can be found under 'Contents' on page 2 of each of the Outcomes Calculator User Manuals.
The iCAHE Outcomes calculator is accompanied by a iCAHE OC User Manual and Software Guide. We encourage users to provide feedback for evaluation, and to enable iCAHE to provide additional information about new versions of the calculator.
What are they?
There are now five iCAHE Outcomes Calculators:
iCAHE Basic Outcomes Calculator
iCAHE Musculoskeletal Outcomes Calculator
iCAHE Incontinence Outcomes Calculator
iCAHE Neurological Disorders Outcomes Calculator
iCAHE Chronic Disease Management Outcomes Calculator
All 5 iCAHE Outcome Calculators are available for purchase on the one CD, click here for more information.
We are very proud of the iCAHE Outcomes Calculators which have been developed from the combined efforts of many iCAHE staff since 1999. We are also grateful for the input of researchers at Stellenbosch University, Capetown, South Africa. The iCAHE Outcomes Calculator Introduction PowerPoint file (below) provides an outline of the iCAHE OCs and how they can be used.
iCAHE Outcomes Calculators Introduction (PDF 3.7MB)
What do they do?
The iCAHE Outcomes Calculators aim to facilitate the use of standardised outcome measures in clinical practice to monitor changes in patient status over time. Patients complete selected outcome measures prior to, or following treatment (without reference to the clinician) and the data can be entered into the iCAHE Outcomes Calculator by administrative staff. This avoids the potential bias by the clinician and ensures that the patient's view of their condition is recognised. The iCAHE Outcome Calculator automatically computes the score for each outcome measure and uses norms for comparison, as appropriate. Summarising outcomes in this way would assist in communicating patient progress, between clinicians, patients and funders.
How much do they cost?
All five calculators are available on the one CD-ROM, complete with CAHE Outcomes Calculator User Manuals and Software Guides for AU$100 including postage and handling (plus GST). This is a once off fee, allowing institutions to install the calculators on multiple systems and includes development, maintenance and any future upgrades to the calculators. To register for a copy of the CD-ROM containing all four iCAHE Outcomes Calculator's simply open the iCAHE OC Order Form for more information and ordering details. Fill out your details, and fax, email or post them in as per instructions on page 2. (International enquiries: Please contact iCAHE Enquiries regarding postage costs).
There are now five iCAHE Outcomes Calculators and each Outcomes Calculators have a dedicated iCAHE OC User Manual and Software Guide. The iCAHE OC User Manuals and Software Guides are designed to make the iCAHE Outcomes Calculators accessible and simple to use.
- iCAHE Musculoskeletal Outcomes Calculator User Manual (PDF 4.27MB)
- iCAHE OC Musculoskeletal Software Guide (PDF 605KB)
- iCAHE Incontinence Outcomes Calculator User Manual (PDF 2.04MB)
- iCAHE OC Incontinence Software Guide (PDF 505KB)
- iCAHE Neurological Disorders Outcomes Calculator User Manual (PDF 1.43MB)
- iCAHE OC Neurological Disorders Software Guide (PDF 600KB)
- iCAHE Chronic Disease Management Outcomes Calculator User Manual (PDF 1.23MB)
- iCAHE OC Chronic Disease Management Software Guide (PDF 566KB)
Bergs Balance Scale
The Berg Balance Scale (BBS) is an objective performance-based measure of balance abilities. It has been used to identify and evaluate balance impairment in the elderly. It consists of 14 tasks in everyday life. The items test the client’s ability to maintain positions or movements of increasing difficulty by diminishing the base of support from sitting, standing to single leg stance. The ability to change position is also assessed. The test is simple, easy to administer and safe for the evaluation of elderly patients. It only requires a watch and a ruler as equipment and takes approximately 15 min to perform.
9 Hole Peg test
The Nine-Hole Peg (NHP) Test is a simple, timed test of fine motor coordination, involving placing dowels (9 mm in diameter and 32 mm long) in 9 holes. It measures finger dexterity among patients with physical disabilities. The test administration is brief involving only the time it takes to place and remove all 9 pegs in a 5-inch square board.
6 minute walk test
The Six-Minute Walk Test (6MWT) is used as a measure of exercise tolerance and endurance for community dwelling older adults. It has been used to describe and monitor an individual's endurance level, as a one-time measure of functional status as well as a predictor of morbidity and mortality. The self-paced Six-Minute Walk Test is dependent on an individual's ability to ambulate.
Functional Reach test
Functional Reach Test is a measure of balance and is the difference, in inches, between arm’s length and maximal forward reach, using a fixed base of support. This can be used to detect balance impairment, change in balance performance over time and in the design of modified environments for impaired older persons.
Clinical Test of Sensory Interaction and Balance
The Clinical Test of Sensory Interaction and Balance (CTSIB) is a timed test that was developed for systematically testing the influence of visual, vestibular and somatosensory input on standing balance. It has been used clinically to assist in the evaluation and monitoring of persons with vestibular dysfunction. CTSIB has also been used to determine fall risk in older adults and with persons post-stroke, for persons with peripheral neuropathy, for persons with lower extremity amputation and with children.
The test consists of 6 conditions: Conditions 1, 2 & 3 involve standing on the floor with eyes open, eyes closed, and wearing a visual-conflict dome. Use of the conflict dome results in a discrepancy between vestibular input stimulated by postural sway and visual flow. Conditions 2 and 3 should examine different aspects of sensory organization of visual information that may require different postural adjustments. Conditions 4, 5 and 6 involve standing on foam and repeating the visual conditions described for conditions 1-3. For each condition, the length of time the subject can maintain standing and the amount of body sway that occurs are assessed.
Timed up and Go test
The original purpose of the TUG was to test basic mobility skills of frail elderly persons. This test measures mobility in people who are able to walk on their own. If they use an assistive device they are permitted to do so during the test as well. It tests dynamic balance and functional independence by measurement of the time in seconds taken for a person to rise from sitting from a standard arm chair, walk 3 meters, turn, walk back to the chair, and sit down.
The Tardieu Scale is a passive measure that evaluates spasticity. The scale accounts for the velocity-dependent nature of spasticity by passively stretching the muscles either at the speed of a limb falling under gravity or as fast as possible (greater than the speed of a limb falling under gravity) as these velocities elicit the stretch reflex.
Sit to Stand test
This test is used to get a measure of functional lower limb muscle strength. It may also be useful in quantifying functional change of transitional movements. There are many variations of this test. The one described here is the five times sit to stand test where the patient stands up and sits down in a chair with arms crossed five times as fast as possible.
Motor Assessment Scale
The Motor Assessment Scale was designed to assess the ability of stroke patients to perform functional tasks rather than isolated patterns of movement or synergies. This was based on the principles of Motor Relearning Programme.
All five calculators are available on the one CD-ROM, complete with iCAHE Outcomes Calculator User Manuals and Software Guides for AU$100 including postage and handling (plus GST). This is a one off fee, allowing institutions to install the calculators on multiple systems and includes development, maintenance and any future upgrades to the calculators. To register for a copy of the CD-ROM containing all four iCAHE Outcomes Calculator's simply open the iCAHE OC Order Form for more information and ordering details. Fill out your details, and fax, email or post them in as per instructions on page 2. (International enquiries: Please contact Olivia Hill regarding postage costs).
All 5 iCAHE outcomes calculator are made available on the one CD, as opposed to a download. This allows better flexibility across different operating systems. Included in the OC CD-ROM is an additional software program that ensures the iCAHE Outcomes Calculator software is compatible with the majority of computer operating systems (both PC and MAC).
To assist you with the installation and use of the iCAHE Outcomes Calculators the
iCAHE Outcomes Calculator user manuals are available online.
- Please note that the iCAHE Outcomes Calculators can only be loaded onto individual PC hard-drives and not shared over an office network system. The iCAHE OC CD, containing the iCAHE Outcomes Calculator software, also includes a software patch which should be activated if the calculators do not immediately install. iCAHE Outcomes Calculators are not suitable for loading on MAC computers.
The minimum recommended is a Pentium II 450 MHz or faster processor with 64MB RAM. A mouse is required to operate the software.
Approximately 30MB of disk space is required for the initial installation of the Outcome Calculator. Additional space will be required as the amount of data stored in your copy of the calculator grows.
The Outcome Calculator will run on Microsoft Windows 98 (1st and 2nd editions), Windows ME, Windows NT 4.0 (with Service Pack 6a), Windows XP Home, Windows XP Professional (with Service Pack 1), Windows 2000 Professional (with Service Pack 3), and Windows Server 2003 (Web, Standard, Enterprise, and Datacenter Editions in 32-bit).
Good luck and we look forward to hearing your feedback from you as you utilise this innovative tool.
Scale: International Consultation on Incontinence Questionnaire Urinary Incontinence Quality of Life Module (ICIQ-LUTSqol)
Reliable and valid in urinary incontinent women, young and old, from all patient groups
1. What it measures
The ICIQ-LUTSqol is primarily intended for female urinary incontinence quality of life research, to form part of the standard investigative protocol at baseline and follow-up in prevalence studies, clinical trials and investigative studies of symptoms or QoL. The ICIQ-LUTSqol will also provide a robust measure for use in randomised trials evaluating treatments for urinary incontinence in order to assess their impact on patient outcome. Investigators will be able to select particular modules or domains for use independently or together as the objectives of each study requires.
2. How it is scored and what the score means
Please refer to page 50-57 of the Incontinence Outcomes Calculator user manual for more details and a copy of the Index
Kelleher,C., Cardozo, L., Khullar,V., Salvatore, S. A new questionnaire to assess the quality of life of urinary
Areas of study and research
- Health Research
- Alliance for Research in Exercise, Nutrition and Activity (ARENA)
- Centre for Cancer Biology
- Centre for Drug Discovery and Development
- Centre for Population Health Research
- Centre of Research Excellence for the Prevention of Chronic Conditions in Rural and Remote High Risk Populations
- International Centre for Allied Health Evidence
- Medicine and Device Surveillance CRE
- Quality Use of Medicines and Pharmacy Research Centre
and Social Sciences
- Art, Architecture and Design
- Communication, International Studies and Languages
- Psychology, Social Work and Social Policy
- Hawke Research Institute
- Asia Pacific Centre for Work Health and Safety
- Australian Centre for Child Protection
- Barbara Hardy Institute
- Centre for Research in Education
- Hawke EU Jean Monnet Centre of Excellence
- Centre for Islamic Thought and Education
- International Centre for Muslim and non-Muslim Understanding
- Research Centre for Languages and Cultures
- Zero Waste SA Research Centre for Sustainable Design and Behaviour (sd+b)
IT, Engineering and
- Future Industries Institute
- UniSA College