How much is my Telephone/Network work going to cost me?
Return to: ISTS FAQ Home > Telephone > General
Physical Installation of Double Data Point $450 (no
activation included, charge is for install only, single data points are not
available). Cost may vary depending on the complexity of the location.
Please contact IT Help Desk for more
details
For examples of how you would be charged for some standard installs
please see the examples at the bottom of the page
NEC Phone Charges (does not include network activation which is required
for most devices)
- New NEC IP Phone, 6 button $200, 24 Button $250. The NEC
6 and 24 button handset can share a network connection with
a computer so may not require a new network point to be
activated.
Click here for more all available NEC handsets
- New Wireless SIP Handset $300 Please be aware that to
use a Wireless SIP handset you will need a dedicated SIP
enabled VoIP network point
- New Analogue NRX-3 handset $250 Please be aware that to
use an analogue phone on the new phone system will require
an analogue phone extension
Network Activation Costs
- Activate single network point for data $185
- Activate single network point for NEC VoIP $185
- Activate single network point for Wireless SIP VoIP $185
- Activate single network point for Analogue phone $450
plus NEC technician charges
- Activate single network point for Analogue phone with
UPS (UPS will allow phone to work in the case of a power
failure to campus or building), contact
IT Help Desk for more
information
NEC technician charges
NEC technician charge are dependant on the lead time of the job you have
requested and range from $130 to $250 per extension connected, only needed
for analogue lines or other specialist phone services.
Examples
All the examples below assume there is at least one free side on a double
data point. If a new double data point needed to be installed then that
would add at minimum $450 to the total cost
Example 1
To install a new NEC 6 button phone in a location where there is already
a networked computer. Costs would be as follows
- New NEC 6 button phone $200
- No cost to activate the network point as there is
already a network point active for computer
- No NEC technician charges as the phone can be installed
by UniSA staff
Total Cost $200
Example 2
To install a new wireless SIP phone in a location where there is already
a networked computer. Costs would be as follows
- New Wireless SIP phone $300
- Wireless SIP phone can't share the same network port as
a computer so a new network point needs to be activated,
$185 (This assumes that the B side port of the double data
point is not being used)
- No NEC technician charges as the phone can be installed
by UniSA staff
Total Cost $485
Example 3
To install a new extension for a fax line in a location where there is a
unused A or B side of a double data point
- Activate the free port on the double data point for use
as an analogue line $450
- Assuming that we give NEC 4 days to install the
extension, NEC technician charges $120
Total Cost $570 plus
the cost of FAX machine
These figures are a guide only and are subject to change.
**Phones are subject to availability.
top^
