Information Strategy and Technology Services
Return to: ISTS FAQ Home > Internet connection
When setting up the UniSA Corporate VPN there is an option to route all traffic through the remote gateway (in this case the it is the UniSA Corporate VPN), when this is enabled you will not be able to access the internet unless you are using UniSA's web proxy.
For full instructions on setting up the Corporate VPN please see the following AskIT page
If you want to continue routing all traffic through the UniSA Corporate VPN and want to also be able to browse the internet you will need to manually set your proxy settings. See the following web link
To stop all traffic being routed through the UniSA network you will firstly need to open the UniSA Corporate VPN but do not click connect until you have followed the instructions below.
Step 1: Configure additional connection properties
 |
Click on the Properties tab |
 |
Step 2: Selecting the Internet Protocol
|
|
Click on the networking tab |
 |
Highlight Internet Protocol (TCP/IP) |
 |
Click Properties |
 |
Step 3: Configuring the Advanced Internet Protocol Properties
|
|
Click Advanced |
 |
Step 4: Selecting to use the University Internet or
your
own Internet
|
|
Un-tick the "use default gateway on remote network" box |
 |
