Division of Information Technology, Engineering and the Environment
School of Advanced Manufacturing and Mechanical Engineering
School of Advanced Manufacturing and Mechanical Engineering
Luong, L.H.S., Marian, R.M. and Abhary, K., Assembly sequence optimization using genetic algorithms, Intelligent Knowledge-Based Systems: Business and Technology in the New Millennium, Kluwer Academic Publishers, pp234‑271.
Bari, S. and Naser, J. Simulation of smoke from burning vehicle and resulted pollution levels due to traffic jam in a road tunnel. International Journal of Tunnelling and Underground Space Technology, 2005, 20 (3), pp. 281-290.
Bruno, F, Using phase change materials (Pcms) for space heating and cooling in buildings.", EcoLibrium, Journal of Australian Institute of Refrigeration, Air conditioning and Heating, Vol. 4, No. 2, pp 26-31.
Gao, W.M, Kong, L, Hodgson, P.D, Experimental Investigation and Numerical Simulation of Heat Transfer in Quenching Fluidised Beds, International Journal of Materials & Product Technology, Inderscience Enterprises Ltd, Vol. 24, Issue 1, pp 319 338.
Gl, and Sobhi-Najafabadi B Use of evolutionary techniques for multi-objective optimisation of electromotion devices Journal of Materials Processing Technology, Elsevier, Vol. 161, Issue 1-2, pp. 300-304, 2005.
Halawa, E., Saman, W., and Bruno, F., Numerical analysis of a pcm thermal storage system with varying wall temperature, Energy Conversion and Management, Vol 46, pp 2592-2604.
James, S., Lateral dynamics of motorcycles towering single-wheeled trailers, Vehicle System Dynamics, Vol 43, N0 8, pp 581-599.
Kong L. and Peng Z., Investigation of Nonisothermal Crystallization Behaviors of Poly and silica nanocomposites using differential scanning calorimetry, Key Engineering Materials, Vol 295, Issue No 296, pp 39-44.
Kong, L, Lung, Dragon K.P, Hsu, H.Y, Development of a Photolithography Distribution Scheme in Semiconductor Wafer Fabrication, International Journal of Agile Manufacturing, Vol 8, Issue 1, pp 115-122.
Kong, L.X., B. Wang, and F.H. She, Secondary Flow in a Strong Curved Converging Channel. The Research Journal of Textiles and Apparel, 2005, Institute of Textile & Apparel, Vol 9, Issue 3, p. 58-63.
Ling, D.S.H., Hsu, H.Y., Lin, G.C.I and Lee, S.H.L. Enhanced image-based coordinate measurement using a super-resolution method, Robotics and Computer-Integrated Manufacturing, Vol 21, No 6, pp 579 - 588.
Peng Z, Kong L, Li, S.D, Dynamic Mechanical Analysis of Polyvinylalcohol/silica nanocomposite, Synthetic Metals, Vol 152, Issue No 1-3, pp 25-28.
Peng Z, Kong L, Li, S.D, Non-isothermal crystallization kinetics of self-assembled polyvinylalcohol/silica nano-composite, Polymer, Polymer, Vol 46, Issue No, 6, pp 1949-1955.
Peng Z, Kong, L, Li, S.D, Isothermal Crystallisation behaviour and kinetics of Polyvinylalcohol/silica nanocomposite, Synthetic Metals, Vol 152, Issue No 1-3, pp 321-324.
Peng Z, Kong, L, Li, S.D, Thermal properties and morphology of a poly (vinyl alcohol)/silica nanocomposite prepared with a self-assembled monolayer technique, Journal of Applied Polymer Science, Vol 96, Issue No 4, pp 1436-1442.
Peng Z. and Kong L.X., Development of a Novel Micro-Spray-Assembled Process for Constructing Multilayer Ultra-thin Film, Journal of Metastable and Nanocrystalline Materials, Vol. 23, 331-334.
Peng Z., Kong L.X., Study on Thermooxidative Degradation of Poly (vinyl alcohol)/Silica Nanocomposite Prepared with SAM Technique, Journal of Metastable and Nanocrystalline Materials, Vol. 23, 375-378.
Saman, W., Bruno, F. and Halawa, E. Thermal performance of PCM thermal storage unit for a roof integrated solar heating system, Solar Energy, Vol 78, pp 341 349.
Senadeera, W., Bhandari, B. R., Young, G. and Wijesinghe, B. Modeling dimensional shrinkage of shaped foods in fluidized bed drying. Journal of Food Processing and Preservation. 29 (2): pp 109-119.
She, F.H., Xia, F, Zhang, .W.S, Kong, L.X, Objective Measurement of Wool Fibre Fineness Using 2-D Gabor Filter. Research Journal of Textiles and Apparel, Institute of Textile & Apparel, Vol. 9, No. 3, pp 29-33.
Sobhi-Najafabadi B and. Gl . Deterministic techniques for design optimisation of electromotion devices with multiple objectives. Journal of Materials Processing Technology, Elsevier, Vol. 161, Issue 1-2, pp. 282-287, 2005.
Wang, D., Nagalingam, S. and Lin, G.C.I., A novel, multi-agent architecture for a Virtual CIM System, International Journal of Agile Manufacturing, Vol 8 No 1, pp 69-81.
Kirke, B. Go with the flow: Tidal current energy, Solar Progress, Renewable Energy for Australasia, March 2005, Volume 26, Number 1.
Spiridonov, P.N., Protopopov, Yu. M. Plasticheskie Massy (2004), (11), Optimization of injection molding based on technical-economic process parameters. CODEN: PLASAI ISSN: 0554-2901. Journal written in Russian Vol 11 pp 36-39.
Spiridonov, P. Lambrinos, E. Peng, Zheng, Extrusion of monofilaments of thermoplastic elastomers. Elsevier Limited, ISSN: 0379-6779, Vol 152, pp. 61-64
Abhary, K. A simple analytical method for teaching force analysis of planar frictionless mechanicsms, ASME International Mechanical Engineering Congress and Exposition, 5-11 November, Orlando, Florida. CD copy.
Belusko, M., Saman, W. and Bruno, F. Analysis of a roof integrated solar air collector, ISES 2005 Solar World Congress, Orlando Florida, 6 12 August 2005.
Fraser, K., Harris, H. and Luong, L. Improving Employee Relations and Manufacturing Performance: Understanding the Important Human Factors in Team-Based Cellular Manufacturing, 5th Annual Pacific Employment Relations Association Conference, Yeppoon, Queensland, 21 24 November 2005.
Gao, W, Kong, L & Hodgson, P. D, Computational simulation of heat transfer and optimization of sphere regenerators, 5th International Symposium on Multiphase Flow: Heat Mass Transfer and Energy Conversion (ISMF05), Xian Jiaotong University Press, Xian, China, 3-6, July, 2005.
Gl, and Sobhi-Najafabadi, B. A priori analysis of generator voltage harmonic content for power quality assessment, Proceedings of the IASTED International Conference on Energy and Power Systems, EPS 2005, April 18-20, Krabi, Thailand, CD-ROM, pp. 251-256, 2005.
Gl, O and Sobhi-Najafabadi, B. Quasi dynamic performance analysis of a single-phase permanent magnet motor with asymmetrical air gap using FEA, XII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF 2005, September 15-17, 2005, Baiona, Spain.
Gl, . and Sobhi-Najafabadi, B. Joint use of circuit models and complexor diagrams in generator design, Proceedings of International Conference on Renewable Energy and Power Quality, 16-18 March 2005, Zaragoza, Spain.
Gl, . and Sobhi-Najafabadi, B.Synchronous generator design with impedances and complexors, International Conference on Renewable Energy and Power Quality, ICREPQ, 16-18 March, 2005, Zaragoza, Spain.
Halawa, E., Saman, W. and Bruno, F. Simulation of a roof-integrated solar heating system with PCM thermal storage, ISES 2005 Solar World Congress, Orlando Florida, 6 12 August 2005.
Huang, H.K, Lin, G, Prototype production by two cooperating robots, 3RD International Conference on Manufacturing Research (ICMR2005), 6-8 September 2005, Cranfield, UK.
Ji, H, Kong, L, Hsu, H.Y, Lin, G.C, Fan, K.C, Concept designs of tactile probe tips for down scaled 3D CMMs, 2nd International Symposium Precision Mechanical Measurements, Mechanical Engineering Publisher Co. of China, Beijing, China 24-28 August 2004.
Lin, H., Kong, L., Hsu, H.Y. modelling design and degradation using artificial neural networks, intelligent systems and robotics (CISAR 2005), Putrajaya, Kuala Lumpur, Malaysia, 6-8 December 2005.
Lin, H.W., Nagalingam, S. and Chiu, M., Development of a Collaborative Decision-Making Model for a Network of Manufacturing SMEs, 18th International Conference on Production Research, University of Salerno, Fisciano (SA), Italy, CD-ROM, 31 July 4 August, 2005.
Lo, T.S.L, Luong, L.H.S. and Marian, R.M. Intelligent demand planning for managing the reverse logistics process, 20005 IEEE International Conference on Service Operations and Logistics, 10-12 August 2005, Beijing China.
Marian, R., Luong, L.H.S., Akararungruangkul, R., Optimisation of the distribution network using genetic algorithms, 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, pp 1379-1384.
Marian, R., Motevallian, B., Luong, L.H.S, Abhary, K., A framework for the definition of quality measures for optimizing assembly/disassembly operations, 35th International Conference on Computers and Industrial Engineering, 19-22 June 2005, Istanbul, pp 1373-1378.
Mohd Lair, N.A, Luong, L., Marian, R. and Lee, S.H.L., Supply chain management strategic planning: A review, 1st International Conference on Operations and Supply Chain Management, 15-17 December 2005, Bali.
Motevallian, B., Abhary, K., Luong, L.H.S., and Marian, R. A generation and optimisation of feasible disassembly sequences, Tehran International Congress on Manufacturing Engineering, 12-15 December 2005, Tehran, Iran.
Motevallian, B., Luong L.H.S., Abhary, K., and Marian, R., A heuristic method to generate an optimum disassembly sequence, ILMF-2005. 27th February 2nd March 2005. Adelaide, Australia.
Nicolaev, I, Spiridonov, P. Study of electrolytic plasma cell as a prospective method for hydrogen production and thermal energy generation International Manufacturing Leaders Forum on Global Competitive Manufacturing, 27 February - 2 March, Adelaide, Australia, CD-ROM, 2005.
Raman, D., Nagalingam, S. and Chiu, M., A Fuzzy Rule Based System to Measure Facility Layout Flexibility, 18th International Conference on Production Research, University of Salerno, Fisciano (SA), Italy, CD-ROM, 31 July 4 August 2005.
She, F,H, Tung, K.L. and Kong, L.X. Computing effective pore sizes and distributions of porous membrane with Euclidean distance transformation, International Manufacturing Leaders Forum, Adelaide, Australia, 27 Feb 2 March 2005.
She, F,H, Xia, F., Zhang, W.S and Kong, L.X. Objective assessment of wool staples fineness based on their textual features, International Manufacturing Leaders Forum, Adelaide, Australia. 27 Feb 2 March 2005.
She, F.H., Kong, L.X., Kouzani, A., Zhang, W.S. and Xia, F. Fibre diameter measurement of wool staples by utilizing morphological operations and Euclidean distance transform. International Conference on Intelligent Systems and Robotics (iCISAR2005), Putrajaya, Malaysia, 6 8 December 2005.
She, F.H., Kong, L.X., Zhang, W.S., Xia, F. and Kouzani, A. Texture Analysis of textile fabrics using wavelet transform and gray-level co-occurrence features, International Conference on Intelligent Systems and Robotics (iCISAR2005), Putrajaya, Malaysia, 6 8 December 2005.
Shum. P, Lin. G, Bensley. R, Determinants of financial performance in new product development an empirical model for the manufacturing industry, 3RD International Conference on Manufacturing Research (ICMR2005), 6-8 September 2005, Cranfield, UK.
Sliva, E., Sobhi-Najafabadi, B., Tonkin, M. and Popov, M. Design of an autonomous smart recording sensor for oil industry applications, International Manufacturing Leaders Forum on Global Competitive Manufacturing, 27 February - 2 March, Adelaide, Australia, CD-ROM, Paper Code #AMSAU49, 2005.
Sobhi-Najafabadi, B. and Gl, ., Deterministic optimisation in derivative generator design International, Conference on Renewable Energy and Power Quality, ICREPQ, 16-18 March, 2005, Zaragoza, Spain.
Sobhi-Najafabadi, B. and Gl, . An SQP-based optimisation algorithm for the derivative design of generator, Proceedings International Conference on Renewable Energy and Power Quality, 16-18 March 2005, Zaragoza, Spain.
Sobhi-Najafabadi, B., Halim, D., Sliva, E. and Tonkin, M. Multiple-rotor permanent magnet dc motor topologies for low-cost manufacturing, International Manufacturing Leaders Forum on Global Competitive Manufacturing, 27 February - 2 March, Adelaide, Australia, CD-ROM, Paper Code #DRPAU25, 2005.
Spuzic, S., Fabris, N., Rice, J., Stevens, C., Abhary, K., Nouwens F., Contribution to cross-disciplinary lexicon, 4th ASEE/AAEE Global Colloquium on Engineering Education, (GCEE) Sydney, 26-29 September 2005.
Xia, W, Gao, W, Hsu, H. Y & Kong, L, Computational simulation of heat transfer in glass capillary heated by filaments, 5th International Symposium on Multiphase Flow: Heat Mass Transfer and Energy Conversion (ISMF05), Xian Jiaotong University Press, Xian, China, 3-6, July, 2005.
Xing, K., Abhary, K. and Luong, L. The evaluation of product upgradability toward remanufacture, Tehran International Congress on Manufacturing Engineering, 12-15 December 2005, Tehran, Iran. CD Copy.
Yu. Z, Shi. Y, Hsu H Y, Kong. L, Application of Nonlinear Regression Methods in the Evaluation of Piezoelectric Materials, International Conference on Computational Methods in Science and Engineering 2005, Loutraki, Greece, pp 933-936, 21-26 Oct 2005.
Zhang, W, Kong, L, She, M, Hong, J, A fast circle detector using Ptolemy theorem, 2nd International Symposium Precision Mechanical Measurements, Mechanical Engineering Publisher Co of China, Beijing, China, 24-28 August 2004.
Zhuge, Y. and She, F.H., Use of Recycled Fibres As Concrete Reinforcement - An Experimental Investigation, Sustainable Building South East Asia, Kuala Lumpur, Malaysia, 11-13 April 2005.
Bruno, F. Managing the peak load contribution of air conditioners using PCMS, Energy Sustainability and power Conference, 14 October 2005, Bently Western Australia.
Fraser, K., Harris, H. and Luong, L. Cellular Manufacturing: Are Teamwork and other human factors important, 9th International Workshop on Teamworking, 8 9 September 2005, Lisbon Portugal.
Heinzen, R., Jordan, U., Krause, M., Vajen, K., Potential and Simulation of Open-Cycle Solar-Assisted Climatisation-Plants in Single-Family-Houses, International Conference Solar Air Conditioning,, 6 7 October 2005, Staffelstein, Germany, pp 236-240.
Krause, M., Saman, W., Vajen, K., Regenerator Design for Open Cycle Liquid Desiccant Systems Theoretical and Experimental Investigations, International Conference Solar Air Conditioning, 6 7 October 2005, Staffelstein, Germany, pp 91-95.
Senadeera, W., Comparison of the effects of fixed bed and fluidized bed drying on physical property changes of spherical food material using peas as a model material, 2nd International Conference on Innovations in Food Processing Technology and Engineering, 11-13 January 2005, Bangkok, Thailand.
Xing, K., Luong, L. And Abhary, K. A methodical planning to enhance reutilisation potential in product design, 2005 International Conference on Asian Green Electronics, 15-18 March 2005, Shanghai, China
