Division of Information Technology, Engineering and the Environment
School of Advanced Manufacturing and Mechanical Engineering
School of Advanced Manufacturing and Mechanical Engineering
Nagalingam, S. & Lin, G. (2000), CIM Justification and Optimisation, London and New York, Taylor and Francis
Slattery, M., Desbiolles, J. & Greenaway, J. (2000), Match Points and Boots to Optimise Placement, in Min Till Drill: A Guide to Minimum Tillage Cropping Systems, Australia, Scott Print, 271 - 275
Kelly, P., Slattery, M., Fielke, J. & Riley, T. et al. (2000), Point Selection Influences Tillage Performance, in Min Till Drill: A Guide to Minimum Tillage Cropping Systems, (Simon Wallwork Ed.), Australia, Scott Print, 263-268
Kelly, P., Slattery, M. & Giumelli, J. (2000), Take Time with Tine Selection and Set Up, in Min Till Drill: A Guide to Minimum Tillage Cropping Systems, (Simon Wallwork Ed.), Australia, Scott Print, 249-253
Mills, J.E. & Ayre, M.E. (2000), Improving structural engineering teaching: applying the educational principle of construction, Journal of Structural Engineering Transactions, 3, 1-8
Chen, L. & Lin, G. (2000), Reverse Engineering in the Design of Turbine Blades - A Case Study in Applying the MAMDP, Robotics and Computer Integrated Manufacturing, 16/2-3, 161-167
Desbiolles, J. & Slattery, M. (2000), Points and Boot Selection Crucial for Sowing Success - Part 1, Australian Grains - Leading Edge, Aug-Sep 00, 38-40
Desbiolles, J. & Slattery, M. (2000), Points and Boot Selection Crucial for Sowing Success - Part 2, Australian Grains - Leading Edge, Oct-Nov 00, 39-40
Desbiolles, J. & Roget, D. (2000), Seeding System Technology Affects Direct Drilled Crop Response in the Mallee, 2000 Australian Grains Field Research Manual, 2000, 72-74
Lin, G., Lu, T. & Huang, H. (2000), A Camera-Aided Method for Accuracy Improvement in Dual-Robot Prototyping System, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing, Singapore
Nagalingam, S. & Lin, G. (2000), A Framework of Group Decision Support System for Virtual CIM, in Proceedings of ICME 2000, 8th International Conference on Manufacturing Engineering, Sydney, Australia
Marian, R., Luong, L. & Abhary, K. (2000), A New Crossover Technique for Assembly Sequence Planning Using GA, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing: Technologies for the New Millennium (ICCIM 2000), Singapore
Hsu, H. & Lin, G. (2000), An Accessibility Based Approach for Design for Disassembly Applications, in Proceedings of ICME 2000, the 8th International Conference on Manufacturing Engineering, Sydney, Australia
Saman, W. & Alizadeh, S. (2000), An Experimental Study of a Cross-Flow Type Plate Heat Exchange for Dehumidification/Cooling, in 38th Annual Conference of the Australian and New Zealand Solar Energy Society, Brisbane
Chan, F., Luong, L., Lau, H. & Marian, R. et al. (2000), Comparative Evaluations of Maintenance Policies in a Manufacturing System, in Proceedings of the 8th International Conference on Manufacturing Engineering (ICME 2000), Sydney, Australia
Lin, G. & Zhou, J. (2000), Concurrency Control in Remote Cooperative Geometry Editing, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing, Singapore
Torng, J., Lin, G. & Ferris, T. (2000), Design of Accurate Measurement System for Robot Position Calibration, in Proceedings of 2000 Pacific Conference on Manufacturing (PCM'2000), Southfield - Detroit
Lin, G. & Eckermann, B. (2000), Development of Culture for Innovation, in Proceedings of ICME 2000, the 8th International Conference on Manufacturing Engineering, Sydney, Australia
Provis, C., Luong, L. & Castle, R. (2000), Development of Leadership in a Manufacturing Environment - The 'We' Factor, in The 2000 IEEE International Conference on Management of Innovation & Technology, ICMIT 2000, Singapore
Zhou, J. & Lin, G. (2000), Development of Virtual Part Base in Cooperative Design, in Proceedings of 2000 Pacific Conference on Manufacturing, Southfield - Detroit
Sexton, C., Lu, T. & Lin, G. (2000), Development of a Rapid Prototyping Robot/CNC Machining System, in Proceedings of ICME 2000, The 8th International Conference of Manufacturing Engineering, Sydney, Australia
Lin, G., Torng, J., Lu, T. & Ferris, T. (2000), Development of a Robot Reverse Engineering (RRE) System, in Proceedings of ICME 2000, The 8th International Conference of Manufacturing Engineering, Sydney, Australia
Luong, L., He, J., Marian, R. & Paranan, S. (2000), Development of a Scheduling Algorithm for Smooth Production in Batch Manufacturing, in Proceedings of the 8th International Conference on Manufacturing Engineering (ICME 2000), Sydney, Australia
Torng, J., Lin, G., Lu, T. & Ferris, T. (2000), Development of an Automated Coordinate Measuring Robot (CMR) for Large Objects Measurement, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing: Technologies for New Millennium Manufacturing (ICCIM 2000), Singapore
Eckermann, B. & Lin, G. (2000), Knowledge Exploitation for Innovation, in 2000 Pacific Conference on Manufacturing, Southfield-Detroit, Michigan, USA
Nagalingam, S. & Lin, G. (2000), Latest Research Directions in Intelligent Manufacturing, in PCM'2000, 6th International Conference on Manufacturing, Southfield - Detroit, Michigan, USA
Luong, L. & Chan, F. (2000), Maintaining Manufacturing Competitiveness Through Computer Integrated Manufacturing, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing: Technologies for the New Millennium (ICCIM 2000), Singapore
Marian, R., Abhary, K. & Luong, L. (2000), On the Definition of Fitness Function for the Optimisation of Assembly Sequences Using GA, in Proceedings of the 8th International Conference on Manufacturing Engineering (ICME 2000), Sydney, Australia
Lin, G. & Spiridonov, P. (2000), Optimisation of Technical and Economic Parameters of Injection Moulding Process, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing: Technologies for New Millennium Manufacturing, Singapore
Bruno, F. (2000), Performance Evaluation of a Heat Pump System for Simultaneous Heating and Cooling, in 28th Annual Conference of the Australian and New Zealand Solar Energy Society, Brisbane
Nafalski, A. & Ayre, M. (2000), Recognising Diverse Learning Styles in Teaching and Assessment of Electronic Engineering, in Proceedings of the 2000 Frontiers in Education Conference (FIE 2000), Kansas
Lu, T., Lin, G., Lee, R. & Kao, Y. et al. (2000), Remote Dual-Robot Machining Through Internet, in 6th International Conference on Automation Technology, Taiwan
Eckermann, B. & Lin, G. (2000), Setting the Focus for Innovation, in The 2000 IEEE International Conference on Management of Innovation and Technology (ICMIT 2000) - Management in the 21st Century, Singapore
Bruno, F. (2000), Simultaneous Storage of Heating and Cooling from a Heat Pump, in 8th International Conference on Thermal Energy Storage, Germany
Lu, T., Lin, G. & Lambrinos, E. (2000), The Development of an Intelligent Robotic Assembly Cell, in Advances in Industrial Engineering Theory, Applications and Practice V, Taiwan
Lin, G., Eckermann, B. & Tomecko, P. (2000), Tradition - A Barrier to Technological Advance or a Road to Continuous Prosperity: A Study of the Australian Rural Float Value Market, in Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice, Taiwan
Lin, G., Nagalingam, S. & Zhou, J. (2000), Virtual CIM for Globalised Manufacturing, in Proceedings of the International Conference on Engineering and Technological Sciences 2000, China
He, J., Luong, L. & Cook, R. (2000), Multi-Attribute Evaluation of Flexible Manufacturing Systems Using Intelligent Software, in Intelligent Systems and Applications (ISA'2000), International ICSC Congress, Australia
Eckermann, B. & Lin, G. (2000), Human Aspects in a Framework to Foster Innovation, in The 33rd CIRP International Seminar on Manufacturing Systems, Stockholm, Sweden
Eckermann, B. & Lin, G. (2000), Innovation in a Research Organisation, in Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice, Taiwan
Chan, F., He, J., Abhary, K. & Zhang, J. (2000), Investigation on Multi-Agent Based Shop Floor Control System, in Intelligent Systems & Applications (ISA'2000), International ICSC Congress, Wollongong, Australia
Saman, W. & Vakilaltojjar, S. (2000), Domestic Heating and Cooling with Thermal Storage, in 8th International Conference on Thermal Energy Storage, Germany
Lin, G., Lambrinos, E. & Lu, T. (2000), Development and Implementation of an Intelligent Robotic Assembly System: A Case Study, in 2000 Automation, The 6th International Conference on Automation Technology, Taiwan
Zhou, J. & Lin, G. (2000), A New Framework for Virtual CIM, in Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice, Taiwan
Huang, H., Lin, G. & Lu, T. (2000), A Method of Machining Error Compensation for Dual Robot Prototyping System Using Dimensional Measurement Data, in Proceedings of the 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice, Taiwan, ROC
Abhary, K. & Nourbakhsh, A. (2000), A Computational Method for Free Transverse-Vibration Analysis of Continuous Stepped-Beams, in Proceedings of the 2nd International Conference on Engineering Computational Technology; Computational Mechanics; Techniques & Developments, Belgium
Nagalingam, S. & Lin, G. (2000), A Distributed Group Decision Support Systems for Virtual Computer Integrated Manufacturing, in The 6th International Conference on Automation Technology, Taiwan
Slattery, M. (2000), A Contour Following Tine Improves Barley Yields by Maintaining Seed Placement Accuracy, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Marian, R., Luong, L. & Abhary, K. (2000), Assembly Sequence Representation and Optimisation Using GA, in Seminar Program & Abstracts - The 1st Australian-Japanese Joint Seminar: Applications of Electromagnetic Phenomena in Electrical and Mechanical Systems, Adelaide
Murphy, P. (2000), Development of a Light-weight, Flexible, Solar Array for Curved Surfaces, in Proceedings of 38th Conference of Australian & N.Z. Solar Energy Society (ANZES Solar 2000), Australia
Khademolhosseini, N., Riley, T., Fielke, J. & Desbiolles, J. et al. (2000), Effect of Narrow Point Design on Soil Loosening Performance and Force Requirements, in Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Moser, D. (2000), Evaluating the Efficiency of the Australian Legume Processing Industry, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, South Australia
Martin, S., Harris, D. & Saman, W. (2000), Heat Flow Analysis in Solar Cell Modules, in 1999 ISES Solar World Congress, Jerusalem, Israel
Heidenreich, C. (2000), Improved Riffle Washer Design for Increased Heavy Contaminant Removal from Sultanas, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Desbiolles, J. & Godwin, R. (2000), In Situ Soil Strength Characterisation for Tillage Draft Prediction, in Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Burge, A. (2000), In-line Management for Dried Vine Fruit Processing, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Bidhendi, I. & James, S. (2000), Innovations for Agricultural Motorcycles for Improved Load Capacity and Off-road Rollover Safety, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Riley, T. (2000), Machinery for the Viticultural Industry - Research Opportunities, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Saman, W. & Alizadeh, S. (2000), Modeling and Performance Analysis of a Forced-Flow Solar Collector/Regenerator Using Liquid Desiccant, in World Renewable Energy Congress - VI, United Kingdom
Riley, T., Fielke, J., Asoodar, M. & Bellotti, W. (2000), Narrow Point Performance Under Dryland Farming Conditions, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Asoodar, M., Riley, T., Fielke, J. & Bellotti, W. (2000), No-till Sowing Techniques Influence Soil Cone Index and Crop Root Growth, in Proceeding of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Lin, G. & Spiridonov, P. (2000), Optimisation of Technical and Economic Parameters of Injection Moulding Process, in Proceedings of the 5th International Conference on Computer Integrated Manufacturing: Technologies for New Millennium Manufacturing, Singapore
Fielke, J., Moser, D. & Cioba, M. (2000), Physical Characteristics of Dried Sultanas Related to Processing - Coefficient of Restitution, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Fielke, J., Riley, T., Burge, A. & Lomwongphanich, U. (2000), Pull and Lift Forces on a Cage Wheel Lug When Operating in a Wet Clay soil, in Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Saman, W. & Belusko, M. (2000), Roof Integrated Heating and Cooling System, in 1999 ISES Solar World Congress, Jerusalem, Israel
Belusko, M. & Saman, W. (2000), Roof Integrated Solar Collector with Jet Impingement, in 38th Annual Conference of the Australian and New Zealand Solar Energy Society, Brisbane
Desbiolles, J. & Slattery, M. (2000), Seed and Fertiliser Placement Issues with Single and Dual Banding Attachments, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide, Australia
Bruno, F. (2000), Simultaneous Heating and Cooling from a High Temperature Heat Pump, in Sustainable Energy Industry Association International Sustainable Energy Exhibition and Convention 2000, Melbourne, Australia
Riley, T., Rainbow, R., Cass, A. & Bellotti, W. (2000), Spear Soil Opener Effects on Soil Physical Properties and Impact on Wheat Production, in Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Ferguson, S. & Fitzpatrick, R. (2000), Studies Into the Effects of Intensive Cultivation on the Properties of the Tillage Test Track Soil, in Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia
Dean, A., He, J., Luong, L. & Marian, R. et al. (2000), The Development of the Relationship Between Cavity Geometrical Features and Ideal Cavity Pressure Curves in Plastic Injection Moulding, in Seminar Program & Abstracts - The 1st Japanese-Australian Joint Seminar: Applications of Electromagnetic Phenomena in Electrical & Mechanical Systems, Adelaide
Fielke, J., Riley, T., Desbiolles, J. & Khademolhosseini, N. et al. (2000), The Effects of Narrow Seeding Point Design on Soil Physical Properties in a Sandy Loam Soil Under Dryland Conditions, in Proceedings of SEAg 2000, Growing Links - Biennial Conference on Engineering in Agriculture, Adelaide Australia
Slattery, M. (2000), A Contour Following Tine Improves Barley Yields by Maintaining Seed Placement Accuracy, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Martin, S., Saman, W. & Behn, A. (2000), Cool it. Analysis of Heat Flow in Photovoltaic Modules, in Solar 2000, 38th Annual Conference of the Australian and New Zealand Solar Energy Society, Brisbane, Australia
Khademolhosseini, N., Riley, T., Fielke, J. & Desbiolles, J. et al. (2000), Effect of Narrow Point Design on Soil Loosening Performance and Force Requirements, in Program and Abstracts - 4th International Conference on Soil Dynamics, Adelaide, Australia
Moser, D. (2000), Evaluating the Efficiency of the Australian Legume Processing Industry, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Heidenreich, C. (2000), Improved Riffle Washer Design for Increased Heavy Contaminant Removal from Sultanas, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Desbiolles, J. & Godwin, R. (2000), In Situ Soil Strength Characterisation for Tillage Draft Prediction, in Program and Abstracts - 4th International Conference on Soil Dynamics, Adelaide, Australia
Burge, A. (2000), In-line Management for Dried Vine Fruit Processing, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Bidhendi, I. & James, S. (2000), Innovations for Agricultural Motorcycles for Improved Load Capacity and Off-road Rollover Safety, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Riley, T. (2000), Machinery for the Viticultural Industry - Research Opportunites, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Riley, T., Fielke, J., Asoodar, M. & Bellotti, W. (2000), Narrow Point Performance Under Dryland Farming Conditions, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Asoodar, M., Riley, T., Fielke, J. & Bellotti, W. (2000), No-till Sowing Techniques Influence Soil Cone Index and Crop Root Growth, in Program and Abstracts - 4th International Conference on Soil Dynamics, Adelaide, Australia
Fielke, J., Moser, D. & Cioba, M. (2000), Physical Characteristics of Dried Sultanas Related to Processing - Coefficient of Restitution, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Fielke, J., Riley, T., Burge, A. & Lomwongphanich, U. (2000), Pull and Lift Forces on a Cage Wheel Lug When Operating in a Wet Clay Soil, in Program and Abstracts - 4th International Conference on Soil Dynamics, Adelaide, Australia
Desbiolles, J. & Slattery, M. (2000), Seed and Fertiliser Placement Issues with Dual Banding Boot Technology, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Rainbow, R., Cass, A., Bellotti, W. & Riley, T. (2000), Spear Soil Opener Effects on Soil Physical Properties and Impact on Wheat Production, in Program and Abstracts - 4th International Conference on Soil Dynamics, Adelaide, Australia
Ferguson, S. & Fitzpatrick, R. (2000), Studies into the Effects of Intensive Cultivation on the Properties of the Tillage Test Track Soil, in Program and Abstracts - 4th International Conference on Soil Dynamics
Fielke, J., Riley, T., Desbiolles, J. & Khademolhosseini, N. et al. (2000), The Effects of Narrow Seeding Point Design on Soil Physical Properties in a Sandy Loam Soil Under Dryland Conditions, in Book of Abstracts - SEAg 2000, Adelaide, Australia
Riley, T. & Desbiolles, J. (2000), Proceedings of the 4th International Conference on Soil Dynamics, Adelaide, Australia, University of South Australia
Fielke, J. (2000), SEAg 2000, Growing Links - CD of Abstracts, Papers and Presentations, Adelaide, Australia, (Society of Engineering in Agriculture)
